Three-way quick-connect fitting
Legris pneumatic connector – 3104 three-way connector. Copper-plastic connector, which extends the service life of the system. The main body is made of engineering plastic, which is pressure-resistant and low-temperature-resistant. It can still be used normally in an environment of minus 40 degrees, and the bursting pressure can reach 5Mpa. The main body can be rotated to cooperate with the installation of pipelines, and is suitable for a variety of pipe products.
Product Content Introduction
Product Features:
(1) Legris pneumatic connector, 3104 three-way connector.
(2) The product is acid and alkali resistant and the main body is made of nylon.
(3) High pressure resistance, bursting pressure can reach 5Mpa.
(4) Resistant to low temperatures, it can still be used normally in an environment of minus 40 degrees Celsius.
(5) Positive and negative pressure are the same, and it is more suitable for vacuum equipment to reduce pressure release and achieve energy saving.
(6) The pipe and the joint body can be rotated 360° without damaging the pipe, which is suitable for installation requirements at different angles.
(7) It can extend the service life of the system.
(2) The product is acid and alkali resistant and the main body is made of nylon.
(3) High pressure resistance, bursting pressure can reach 5Mpa.
(4) Resistant to low temperatures, it can still be used normally in an environment of minus 40 degrees Celsius.
(5) Positive and negative pressure are the same, and it is more suitable for vacuum equipment to reduce pressure release and achieve energy saving.
(6) The pipe and the joint body can be rotated 360° without damaging the pipe, which is suitable for installation requirements at different angles.
(7) It can extend the service life of the system.
Specifications:
Scope of Application:
Compressed air, vacuum, water
Vacuum Capacity:
755mmHg (99% vacuum)
Operating Temperature:
-20~+60℃
Work Pressure:
When the working temperature is 0~10℃, it can reach 15Bar. The specific working pressure is related to the type of plastic pipe used.
Materials Used:
Engineering plastics, nitrile rubber, stainless steel
Model:
BUT
Working temperature:
-20℃/+60℃
Maximum operating pressure:
15 Bar
Material:
engineering plastics, nitrile rubber
Applicable media:
compressed air, vacuum, water
Vacuum rated pressure:
755 mmHg (99% vacuum)
Suitable for pipe outer diameter: Ø4, Ø6, Ø8, Ø10, Ø12, Ø1/8, Ø5/32, Ø1/4, Ø5/16, Ø3/8, Ø1/2
Precautions for using trachea pneumatic joints:
Product Features:
1. Make sure that the cut surface of the pipe is vertical, there are no scratches on the outer circumference of the pipe, and the pipe is not oval.
2. When inserting the pipe, be sure to insert it to the bottom of the joint. If the pipe is not inserted to the bottom, it may cause leakage.
3. After the pipes are connected, pull the pipes to make sure that the pipes cannot be pulled out of the joints.
4. Please do not use for purposes other than fluids.
5. Do not exceed the maximum operating pressure during use.
6. Do not use it outside the operating temperature range to prevent deformation of the sealing material, which may cause leakage.
7. Do not hit, bend or stretch it artificially to prevent damage.
8. Do not use in places mixed with metal powder or sand dust, as attachment of debris may cause malfunction or leakage.
2. When inserting the pipe, be sure to insert it to the bottom of the joint. If the pipe is not inserted to the bottom, it may cause leakage.
3. After the pipes are connected, pull the pipes to make sure that the pipes cannot be pulled out of the joints.
4. Please do not use for purposes other than fluids.
5. Do not exceed the maximum operating pressure during use.
6. Do not use it outside the operating temperature range to prevent deformation of the sealing material, which may cause leakage.
7. Do not hit, bend or stretch it artificially to prevent damage.
8. Do not use in places mixed with metal powder or sand dust, as attachment of debris may cause malfunction or leakage.
Notes when disassembling:
1. Use appropriate tools to disassemble the pipe joint using the outer hexagonal part of the pipe joint.
2. Remove the sealing material adhering to the opposite side of the pipe joint to prevent the adhering sealing material from entering the surrounding components and causing failure.
2. Remove the sealing material adhering to the opposite side of the pipe joint to prevent the adhering sealing material from entering the surrounding components and causing failure.
