Threaded three-way quick-connect fitting
Legris pneumatic connector – 3108 tee connector. T-type tee connector, novel streamlined design, small size, easy to install. Pressure and low temperature resistance, bursting pressure can reach 5Mpa. Compact and lightweight connection solution, integrated design, ensure reliable connection, can extend the service life of the system.
Product Contents
Product Features:
(1) Legris pneumatic connector, 3108 tee connector/T-type straight tee connector.
(2) The appearance is small and exquisite. The main body of the plastic part is made of engineering plastic, and the main body of the copper part is made of nickel-plated brass.
(3) The product has high temperature and pressure resistance, and the bursting pressure can reach 5Mpa.
(4) The main body can be rotated to facilitate the installation of pipelines at different angles.
(5) The pipe and the joint body can be rotated 360° without damaging the pipe, which is suitable for installation requirements at different angles.
(6) The nitrile rubber seal ensures a complete seal between standard outer diameter tubing and the connector body. Standard tubing is suitable for use with compressed air and vacuum.
(2) The appearance is small and exquisite. The main body of the plastic part is made of engineering plastic, and the main body of the copper part is made of nickel-plated brass.
(3) The product has high temperature and pressure resistance, and the bursting pressure can reach 5Mpa.
(4) The main body can be rotated to facilitate the installation of pipelines at different angles.
(5) The pipe and the joint body can be rotated 360° without damaging the pipe, which is suitable for installation requirements at different angles.
(6) The nitrile rubber seal ensures a complete seal between standard outer diameter tubing and the connector body. Standard tubing is suitable for use with compressed air and vacuum.
Specifications:
Scope of application
Compressed air, vacuum, water
Vacuum Capacity
755mmHg (99% vacuum)
Operating temperature
-20~+60℃
Work Pressure
When the working temperature is 0~10℃, it can reach 15Bar. The specific working pressure is related to the type of plastic pipe used.
Materials used
Engineering plastics, nickel-plated brass, nitrile rubber, stainless steel
Model:
BT
Working temperature:
-20℃/+60℃
Maximum operating pressure:
15 Bar
Material:
nickel-plated brass, engineering plastics, nitrile rubber
Applicable media:
compressed air, vacuum, water
Vacuum rated pressure:
755 mmHg (99% vacuum)
Suitable for pipe outer diameter: Ø4, Ø6, Ø8, Ø10, Ø12, Ø1/8, Ø5/32, Ø1/4, Ø5/16, Ø3/8, Ø1/2
Connection thread: R1/8, R1/4, R3/8, R1/2, 10-5/32, NPT1/8, NPT1/4, NPT3/8, NPT1/2
Precautions for using trachea pneumatic joints:
1. Make sure that the cut surface of the pipe is vertical, there are no scratches on the outer circumference of the pipe, and the pipe is not oval.
2. When inserting the pipe, be sure to insert it to the bottom of the joint. If the pipe is not inserted to the bottom, it may cause leakage.
3. After the pipes are connected, pull the pipes to make sure that the pipes cannot be pulled out of the joints.
4. Please do not use for purposes other than fluids.
5. Do not exceed the maximum operating pressure during use.
6. Do not use it outside the operating temperature range to prevent deformation of the sealing material, which may cause leakage.
7. Do not hit, bend or stretch it artificially to prevent damage.
8. Do not use in places mixed with metal powder or sand dust, as attachment of debris may cause malfunction or leakage.
2. When inserting the pipe, be sure to insert it to the bottom of the joint. If the pipe is not inserted to the bottom, it may cause leakage.
3. After the pipes are connected, pull the pipes to make sure that the pipes cannot be pulled out of the joints.
4. Please do not use for purposes other than fluids.
5. Do not exceed the maximum operating pressure during use.
6. Do not use it outside the operating temperature range to prevent deformation of the sealing material, which may cause leakage.
7. Do not hit, bend or stretch it artificially to prevent damage.
8. Do not use in places mixed with metal powder or sand dust, as attachment of debris may cause malfunction or leakage.
Notes when disassembling:
1. Use appropriate tools to disassemble the pipe joint using the outer hexagonal part of the pipe joint.
2. Remove the sealing material adhering to the opposite side of the pipe joint to prevent the adhering sealing material from entering the surrounding components and causing failure.
2. Remove the sealing material adhering to the opposite side of the pipe joint to prevent the adhering sealing material from entering the surrounding components and causing failure.
