Flat head muffler
Used to reduce the dynamic noise of pneumatic components or devices, it can be directly installed on the port of the component or equipment. It is small in size, easy to install and has a good silencing effect.
Product Contents
Our flat head muffler is used to reduce the dynamic noise of pneumatic components or devices. It can be directly installed on the port of the component or equipment. It is small in size, easy to install and has a good muffler effect.
Product Features:
(1) Carefully selected materials. High-quality copper raw materials are corrosion-resistant, hard, not easy to rust, and have a long service life.
(2) Precision thread. Precision casting, the inner wall of the thread is smooth and burr-free, not easy to leak, and has strong sealing performance.
(3) Easy installation. The muffler can be connected to the busbar, aluminum bar, cylinder, etc. of the solenoid valve according to needs.
(4) Say goodbye to noise. The exhaust port is equipped with a muffler to reduce the exhaust speed and power, thereby achieving the effect of noise reduction.
(2) Precision thread. Precision casting, the inner wall of the thread is smooth and burr-free, not easy to leak, and has strong sealing performance.
(3) Easy installation. The muffler can be connected to the busbar, aluminum bar, cylinder, etc. of the solenoid valve according to needs.
(4) Say goodbye to noise. The exhaust port is equipped with a muffler to reduce the exhaust speed and power, thereby achieving the effect of noise reduction.
Specifications:
| Thread specification | Common name | Other names | External thread diameter (mm) | Internal thread diameter (mm) |
|---|---|---|---|---|
| 1/8 | 1 point | DN6 | 9.7±0.2 | 8.8±0.2 |
| 1/4 | 2 points | DN8 | 12.5±0.3 | 11.5±0.3 |
| 3/8 | 3 points | DN10 | 16.2±0.3 | 15.3±0.3 |
| 1/2 | 4 points | DN15 | 20.3±0.3 | 19.3±0.3 |
| 3/4 | 6 points | DN20 | 25.7±0.5 | 23.9±0.5 |
