Can the nuts and plugs for the inserts be purchased separately?
Home ✦
Industry Knowledge ✦
Can the nuts and plugs for the inserts be purchased separately?
Can the nuts and plugs for the inserts be purchased separately?
As we all know, embedded joints are mainly composed of three parts, namely the joint body, nut and plug. When purchasing, you usually only need to tell the supplier the pipe diameter, thread specifications and joint appearance to get a complete set. During use, if the nut and plug are damaged, can they be purchased separately? The answer is yes, for the following reasons:
The piont is a disposable consumable. It mainly serves to tighten the hose and does not come into direct contact with the medium. However, after long-term use, the piont will gradually deform and damage.
When we check the pipeline, if we find that the meson is damaged, in order not to affect the normal use of the pipeline, we need to replace it with a brand new meson. The production of mesons is standardized, so you only need to contact the supplier, they can supply it separately. However, when ordering, you need to provide the supplier with the outer diameter of the pipe. As for the nut, after long-term use, the nut may corrode and loosen, resulting in a decrease in the fastening performance. Once the nut is loose, it will cause the joint itself to loosen and cause medium leakage. If the joint body is intact and only the nut is damaged, you only need to replace the nut, and there is no need to replace it as a whole. When buying nuts, you must pay attention to the selection. There are quite a lot of specifications and types of nuts on the market. Once the selection is improper, it may not be used. Common specifications of nuts are diameter 4mm; diameter 6mm, diameter 8mm, diameter 10mm, diameter 12mm, diameter 16mm, etc. When choosing, you must find out the size of the specifications.
During the use of the embedded joint, the pion and nut can be purchased separately. If the joint body is found to be intact, but the pion or nut is damaged, in order to save costs, you can only buy the pion or nut.
The piont is a disposable consumable. It mainly serves to tighten the hose and does not come into direct contact with the medium. However, after long-term use, the piont will gradually deform and damage.
When we check the pipeline, if we find that the meson is damaged, in order not to affect the normal use of the pipeline, we need to replace it with a brand new meson. The production of mesons is standardized, so you only need to contact the supplier, they can supply it separately. However, when ordering, you need to provide the supplier with the outer diameter of the pipe. As for the nut, after long-term use, the nut may corrode and loosen, resulting in a decrease in the fastening performance. Once the nut is loose, it will cause the joint itself to loosen and cause medium leakage. If the joint body is intact and only the nut is damaged, you only need to replace the nut, and there is no need to replace it as a whole. When buying nuts, you must pay attention to the selection. There are quite a lot of specifications and types of nuts on the market. Once the selection is improper, it may not be used. Common specifications of nuts are diameter 4mm; diameter 6mm, diameter 8mm, diameter 10mm, diameter 12mm, diameter 16mm, etc. When choosing, you must find out the size of the specifications.
During the use of the embedded joint, the pion and nut can be purchased separately. If the joint body is found to be intact, but the pion or nut is damaged, in order to save costs, you can only buy the pion or nut.
