Causes and treatment methods of leakage of straight-through check valve
Home ✦
Industry Knowledge ✦
Causes and treatment methods of leakage of straight-through check valve
Causes and treatment methods of leakage of straight-through check valve
Straight-through check valves are fluid control equipment. Many industries have demands for fluid control, such as aviation, automobiles, machinery, etc. Therefore, the usage of this product is relatively large. However, when using this product, leakage problems need to be taken seriously, especially after long-term use of the product. The probability of leakage will become greater and greater. Of course, specifically speaking, there are many reasons for leakage. The following will discuss the causes and treatment methods of leakage.
1. Causes of leakage
1. Wear of parts
The product contains many parts, such as springs, gaskets, ball valves, etc. Long-term use will cause these parts to wear out and cause leakage.
2. Too high or too low pressure
The pressure range of the product design is limited. If the pressure is too high or too low, the valve will not be able to close or open normally, causing leakage.
3. Material aging
The materials used in straight-through check valves, such as gaskets and springs, will age after long-term use, leading to leakage.
4. Improper installation
The product must be installed in accordance with regulations. Improper installation may cause the valve to fail to work properly and leak.
2. Leakage method
1. Replacement of parts
A common cause of product leakage is the wear of parts, so replacing wearable parts is a common way to deal with leakage problems. When replacing parts, you need to choose the same specifications as the original to ensure that it matches other parts.
2. Adjust the pressure
Too high or too low pressure is also one of the reasons for leakage of straight-through check valves. Before maintenance, it is necessary to check whether the pressure is within the specified range. If the pressure is too high or too low, the pressure needs to be adjusted to ensure its normal operation.
3. Replace materials
Material aging is one of the reasons for product leakage. If it is determined that the source of the leakage is due to material aging, the wearable parts must be replaced to ensure that the new parts match other parts.
4. Correct installation
Proper installation of the product is an important way to avoid leaks. When installing it, you must make sure it is installed correctly to ensure it works properly.
There are many reasons for the leakage of straight-through check valves, many of which can be solved by simple treatment, such as replacing worn parts, adjusting pressure, replacing materials, etc. When using this product, you also need to master the correct installation method. Regular maintenance can extend the service life of this product and reduce leakage.
1. Causes of leakage
1. Wear of parts
The product contains many parts, such as springs, gaskets, ball valves, etc. Long-term use will cause these parts to wear out and cause leakage.
2. Too high or too low pressure
The pressure range of the product design is limited. If the pressure is too high or too low, the valve will not be able to close or open normally, causing leakage.
3. Material aging
The materials used in straight-through check valves, such as gaskets and springs, will age after long-term use, leading to leakage.
4. Improper installation
The product must be installed in accordance with regulations. Improper installation may cause the valve to fail to work properly and leak.
2. Leakage method
1. Replacement of parts
A common cause of product leakage is the wear of parts, so replacing wearable parts is a common way to deal with leakage problems. When replacing parts, you need to choose the same specifications as the original to ensure that it matches other parts.
2. Adjust the pressure
Too high or too low pressure is also one of the reasons for leakage of straight-through check valves. Before maintenance, it is necessary to check whether the pressure is within the specified range. If the pressure is too high or too low, the pressure needs to be adjusted to ensure its normal operation.
3. Replace materials
Material aging is one of the reasons for product leakage. If it is determined that the source of the leakage is due to material aging, the wearable parts must be replaced to ensure that the new parts match other parts.
4. Correct installation
Proper installation of the product is an important way to avoid leaks. When installing it, you must make sure it is installed correctly to ensure it works properly.
There are many reasons for the leakage of straight-through check valves, many of which can be solved by simple treatment, such as replacing worn parts, adjusting pressure, replacing materials, etc. When using this product, you also need to master the correct installation method. Regular maintenance can extend the service life of this product and reduce leakage.
